Il n'y a pas d'innovation sans recherche car la connaissance joue un rôle clé dans n'importe quel process de développement.
C'est la raison pour laquelle la recherche est la pierre angulaire de toutes les activités que nous menons et que nous proposons à nos clients.
Il s'agit d'une recherche industrielle, visant à obtenir des résultats applicables, soit directement, soit par le biais d’une phase d’industrialisation ultérieure.
En participant à des projets de recherche et d’innovation, nous augmentons jour après jour nos connaissances techniques révolutionnaires et approfondissons notre expertise dans de nouveaux domaines, en innovant et en testant de nouveaux logiciels SBES (Simulation-based Engineering and Sciences), applications, et technologies.
Nous contribuons aux initiatives de recherche en fournissant de l’expertise dans la simulation Multiphysique de produits et de process, ainsi que dans la simulation de système de production.
Nos capacités en matière de gestion et d'analyse de données, de modélisation mathématique, de développement de jumeaux numériques et de systèmes d'aide à la décision (DSS) basés sur les données et la simulation appliqués dans divers domaines et processus industriels complètent et ajoutent de la valeur aux résultats de simulation multiphysique.
En travaillant aux côtés d'excellents consortiums internationaux, nous avons accumulé une expérience considérable dans le suivi des appels à propositions, l'évaluation des idées de projets et la composition de consortiums, et nous avons construit un solide réseau de contacts experts au fil des années.
Nous contribuons activement à la phase de rédaction des propositions, ainsi qu'à la coordination des projets approuvés.
Nous utilisons une méthode efficace, qui a fait ses preuves au fil des années, pour exploiter commercialement les résultats des projets.
Systèmes de production Flexibles
Economie circulaire : dé- et refabrication
Logistique intelligente
Surveillance intelligente de la qualité du produit et du processus
Optimisation des processus de production
Maintenance prédictive
Applications industrielles utilisant l'hydrogène
Physique de la batterie
Systèmes de soutien à la fusion nucléaire
Optimisation des structures et de la dynamique des fluides des composants
Intégration de systèmes pour le télé pilotage
Modélisation de matières premières et recyclées
Physique des composites
Plateformes d'interopérabilité
Système de survie des Astronautes
Systèmes de propulsion suborbitaux [Très basse Orbite terrestre]
Equilibrage énergétique de l'engin spatial
Plateformes pour la médecine personnalisée
Plateformes de corrélation dynamique des données épidémiologiques
Jumeaux bio numériques
Modélisation Multiphysique et organique sur puce
Réingénierie des codes d’applications industrielles pour une utilisation sur des systèmes HPC et exascale
Intégration et test d'applications en CFD et pour d'autres applications de calculs sur des plateformes HPC
Simulations d'incendie et d'évacuation de foule
Simulation de perturbations hydrogéologiques
L'innovation sans recherche est impossible car la connaissance joue un rôle de premier plan dans tout processus de développement : c’est pourquoi la recherche est au cœur de l’activité d’EnginSoft et de son offre de services aux entreprises.
Télécharger la collection de nos projets de recherche
Research project
The initiative is set to transform the European remanufacturing industry by addressing its current limitations and setting new standards for human-centric innovation. It aims to develop and demonstrate a novel remanufacturing paradigm which is inherently safe for humans, target-driven in regeneration and certification, flexible in handling post-use parts variability, and robust for replication in new circular business cases. To achieve these objectives, rEUman partners will develop cutting-edge remanufacturing approaches and integrate them into the value chains.
Research project
Aligned with Europe’s green transition, GeoS-TECHIS supports the EU's "Fit for 55" climate goals by integrating renewable energy, improving efficiency, and fostering the circular economy. Adhering to the European Commission’s "Do No Significant Harm" principle, the project advances environmental sustainability, innovation, and economic growth.
Research project
The main objective of SHINE PV is to develop alternative technological routes to mainstream advanced photovoltaic (PV) production at lower costs and create opportunities for the differentiation of EU manufacturers (cells, modules, equipment and materials) to enhance their competitiveness on the global PV market.
Research project
The activity carried out, as part of the CUP B98I24002620009 project, is characterized by two services aimed at improving skills, methods and tools applied to Process Engineering and Information Systems for Knowledge Management (KM) and GoToMarket).
Research project
ACCURATE will improve the sustainability, resilience, and ability to manage unforeseen events in value chains through Manufacturing as a Service (MaaS).
Research project
ODE4HERA will enable and accelerate the development of Hybrid-Electric Regional (HER) aircrafts.
Research project
YOGA develops a semiautomated and standardized platform targeting clinical laboratories for tissue characterization by biopsy when very little material is available.
Research project
BioStruct is dedicated to developing manufacturing processes for bio-based fiber-reinforced composite parts in structural applications.
Research project
The main specific objective of SPACE is to enable the most widely used European A&C HPC codes (which are also among the most widely used worldwide) to efficiently and effectively exploit the pre-exascale systems funded by EuroHPC Joint Undertaking and available at the end of 2022, and to prepare them for the transition to exascale and beyond.
Research project
The SERENA project aims to develop a prototype propulsion system for a General Aviation-category aircraft based on hybrid power technologies (hydrogen-fueled cells, batteries, and super-capacitors).
Research project
The overall objective of the RaRe2 project is to create a flexible and resilient Holistic Ecosystem Platform powered by the interactions of many European organizations interested in cooperating in the rapid reconfiguration of process chains through collaborative systems and adaptive workforce up-skilling.
Research project
The LIFESAVER addresses the presently unmet societal and healthcare needs in creating and developing of a validated scientific knowledge base for the development and implementation of regulatory approaches relevant to maternal and fetal health.
Research project
The overall objective of the TECNOMED-HUB project is to create, in the Piedmont region of Italy, a technology platform to support medical research 4.0, based on the integration of existing multi-omics platforms with self-learning algorithms, data mining, and big data analytics.
Research project
The experiment will investigate and optimize magnetic-drive centrifugal pumps using Cloud-based HPC with the objective of improving performance and developing new products.
Research project
OPTIMA is an SME-led project that aims to harness and optimize several industrial applications and a set of open source libraries. These will be used in at least three different application domains on two new HPC systems populated with FPGA integrated circuits and using several innovative programming environments.
Research project
DigiPrime will create and operate a federated model of digital platforms by developing reliable data sharing mechanisms and preserving the confidentiality of business-critical data, governed by smart contracts and using block-chain tracking.
Research project
The SMEA project studied and implemented diagnostic and prognostic methodologies, supported by appropriate sensors, to monitor the functional integrity of mechanical components typical of the aviation and transport sectors.
Research project
The Smart Spaces Safety and Security for All Cities project (S4AllCities) is a large-scale project with the aim of revolutionizing the way smart cities become more prepared for and resilient against physical and cyber-attacks on their soft targets, smart spaces and critical infrastructure.
Research project
The final goal of the project is to define a technology solution to repair metal components. End users require an automated or semi-automated solution for mounting a part of partially unknown shape into a machine, measuring the relevant part of its surface in 3D and automatically generating a repair program to restore it to the desired shape.
Research project
Metal Additive manufacturing is a complex operation that requires the fine-tuning of hundreds of processes parameters to obtain repeatability and a high quality design at dimensional, geometric, and structural levels. To help manufacturing companies address these challenges, AMQ_TOOLS develops an innovative quality-oriented decision support framework.
Research project
Development of a novel “manufacturing system-level quality and productivity optimizer tool” enabling the evaluation of the system level impacts of the defect avoidance policies that can be adopted within single processes.
Research project
The ultimate goal of PREMUROSA project is to train a new generation of scientists with an integrated vision of the whole value chain in musculo-skeletal regeneration technologies and able to boost the necessary innovations to achieve precision principles in developing innovative devices and optimized clinical applications.
Research project
The scientific and technological objective of the project is to create a hybrid system where a neural network in the brain of a living animal and a silicon neural network of spiking neurons on a chip are interconnected by neuromorphic synapses, thus enabling co-evolution of connectivity and co-processing of information of the two networks.
Research project
The ISAF – Integrated Smart Assembly Factory – project was created to address the problem of joining two or more large parts/structures made of composite materials and therefore affected by the natural variability of the manufacturing process. The variability creates empty space (“gap”) between the parts of the joint .
Research project
The AGILE project arises from the discussions within the Veneto system of companies and research organizations, and from a post-emergency perspective, identifies as its strategic approach the capacity for an "agile" reconversion of production systems through the application of advanced solutions for product innovation. It forms part of the "Smart Manufacturing" specialization strategy.
Research project
The SIADD project aims to increase the manufacturing quality and sustainability of some additive manufacturing processes for metals, composite materials and multi-material metals/ composites, while also taking into account the personnel’s economic and environmental conditions and well-being.
Research project
Recovery of Mechanical Energy from fluids to feed and Internet of Things (IoT) node that monitors diesel-engine exhaust gases.
Research project
The VOLPE project aims to engineer and industrialize an innovative optoelectronic instrument to detect explosive compounds in volatile form that can be integrated with commercial systems for screening hand luggage, and capable of operating independently.
Research project
The goal of the project was to design a full Plant Characterization Unit (PCU) chamber with a completely sealed environment for the plants and roots. The designed plant control unit inherited the know-how from two previous projects, HySSE and AtSSE.
Research project
LUBFORLIFE’s ultimate goal is the integration of innovative components and technologies into electromechanical actuators, for aircraft and UAV flight controls, which do not require relubrication during their entire operating lifes.
Research project
The project addresses the problem of managing the data collected when servicing very different objects in order to optimize their costs and availability for the end user.
Research project
The ultimate goal of the project is to “open” a new operating area in Space, namely that of Very Low Earth Orbits (VLEO), or orbits between 160 and 250km in altitude.
Research project
The RPASinAir project has the strategic objective of developing the use of Remotely Piloted Aircraft Systems (RPAS) and innovative sensors connected to airborne, satellite or public archive systems, which are capable of reporting critical events and of helping to prevent and manage emergencies (floods, landslides, earthquakes, industrial accidents).
Research project
The project "TEMART - Technologies and materials for artistic manufacturing, Cultural Heritage, furniture, architectural and urban design and the design of the future" aims to improve the products of the above-mentioned sectors (functionality and aesthetics) by applying the different technologies available from the M3NET Regional Innovation Network.
Research project
The robotic equipment developed by the project for grinding, deburring, de-scoring and repairing castings is a first for most ferrous alloy foundries. The direct benefits that can be identified are varied.
Research project
The GAP Project’s innovativeness lies in the development of innovative metallic materials with multi-sector application potential, increased by experimentation with new specific technologies (e.g. the use of ceramic cores for die-casting, surface treatments, and joining techniques).
Research project
The PreMANI project aims to demonstrate the applicability of these techniques across disparate application domains, characterized by very different needs, by leveraging methodological aspects of a general nature.
Research project
The project supports some of the companies within the SINFONET network in using high value services, assistance, orientation, coaching, information, and export promotion to promote not only their individual companies but also the overall foundry supply chain.
Research project
The objective was to design, study and characterize the atmospheric sub-system of a Plant Control Unit and its processes related to crop growth. The atmosphere of the plant-related environment had to be homogeneous and meet the plants’ requirements.
Research project
The project aimed to develop an open integrated framework that connects materials models at various levels of complexity, experimental data sets and commercial information (e.g. ingredients and processing costs), so that decision makers can use a wider variety of key performance indicators.
Research project
The ForZDM project developed and demonstrated tools to support the rapid implementation of Zero-Defect Manufacturing solutions in industry, and to design more competitive and robust multi-stage manufacturing systems.
Research project
The ReCaM-project demonstrates at TRL 7 a set of integrated tools for the rapid and autonomous reconfiguration of agile production systems
Research project
ExaNeSt studies architectural solutions to store and share data in a unified manner. A prototype of a physical platform and rack systems, needed to realiza European exascale systems, are developed.
Research project
ProRegio project aims at developing a manufacturing intelligence based product-service that can rigorously change the current way customer requirements are addressed by manufacturing companies.
Research project
The aim of EDEN ISS is to identify operation procedures for safe food production in space through adaptation, integration and demonstration of higher plant cultivation techniques.
Research project
The MAIPCO project concerns defect analysis in the production of complex composite components in the aeronautical sector and has developed new methodologies to reduce these defects.
Research project
The project covered a wide range of space-related issues ranging from exploration of the Universe to Earth observation, including systems, the management of remote data reception, and awareness-raising activities for regional consumer acceptance of the use of space systems.
Research project
RLW is emerging as a promising joining technology for sheet metal assembly due to benefits on several fronts including reduced processing time, (50-75%) and decreased factory floor footprint (50%), reduced environmental impact through energy use reduction (60%), and providing a flexible process base for future model introduction or product change.
Research project
Framework of demonstration and dissemination of very innovative and cost-effective energy efficiency technologies for the achievement of very low energy new buildings
Research project
The core of this project is the development of a trade-off study, meant to compare several different structures incorporating new technologies, in order to determine the most promising solutions among those considered
Research project
Develop an innovative design of a sealed gully and hydroponic system for space applications of food production with regenerative systems: space stations, lunar base and Mars exploration.
Research project
Objective: To demonstrate that hydrogen "green" production is possible through the exploitation of solar power.
Research project
The MUSIC is strongly aimed at leading EU-HPDC/PIM factories to cost-based competitive advantage through the necessary transition to a demand-driven industry with lower waste generation, efficiency, robustness and minimum energy consumption.
Research project
Production of components made of composite material, equipped with wireless communication systems capable of operating correctly in environments hostile to radio frequency.
Research project
A virtual design environment created for the study of casting and welding processes, of surface and massive heat treatment, and of operational performance of alloy steel-made products, using a design chain approach.
Research project
A virtual design environment dedicated to the study of surface hardening (carburizing and nitride hardening) and of welding of alloy steel products.
Research project
Development of methodologies (and of laboratory version of a software platform designed to implement them), capable of supporting architects and engineers in designing eco-buildings characterized by an optimal compromise between environmental performance (in terms, for example, of the CO2 equivalent produced during their entire life-cycle) and costs
Research project
The main aim of the project is to set out the knowledge and skills that a competent simulation engineer (CAE engineer) should possess, and to develop a set of tools that will enable engineers to develop, manage and certify their competencies within a wide range of industry sectors.
