Conference
The annual event that explores the evolution and new trends in numerical simulation
software
Un logiciel de simulation en mécanique des fluides basé sur la méthode des particules en mouvement
software
modeFRONTIER - Optimisation Multidisciplinaire et Multi-objectifs de Conception
software
RecurDyn® est un logiciel de simulation dynamique et cinématique multi-corps (MBD) et d’analyse par éléments finis.
Your valuable native cad data is now open for use and re-use in any en¬vironment.
CompareVidia is an easy-to-use application for validating and comparing CAD models.
CADfix is the leading software solution for CAD model translation, repair, healing, defeaturing and simplification
MASTA is a suite for the complete design, analysis and optimisation of mechanical transmissions, encompassing numerous advancing forms of analysis from static deflection to component fatigue and NVH.
SIMUL8 is a software for modeling, simulating, analyzing and optimizing the system-level performance of production systems during their design, reconfiguration and production planning phases.
GENESIS is a Software Package for Structural Analysis and Design Optimization, focused on Topology one.
GSAM is an integrated extension that adds topology, topography, freeform, sizing and topometry optimization to the Ansys environment. GTAM is an integrated extension that adds topology optimization to the Ansys environment.
Using this technique, all material constants can be evaluated without expensive experimental campaigns.
ROCKY is a 3D Discrete Element Modeling (DEM) code that simulates the granular flow behavior of different shaped and sized particles.
Maple is an advanced numeric and symbolic solution with a powerful maths engine
MapleSim is the advanced system-level modeling solution based on the Maple mathematical engine and analysis environment to design and simulate multidomain systems, plants and controls in one single environment.
The fully integrated 3D tolerance analysis software tool provides the invaluable insight needed to confidently release designs for manufacture and inform the selection of appropriate tolerances to achieve your variation goals efficiently.
Particleworks is an advanced CFD Software solution, based on the Moving Particle Simulation (MPS) method.
Flownex Simulation Environment delivers technology that enables you to study how systems will behave in the real world, where fluid is the driving factor.
RecurDyn is a superior Multibody Dynamics solution with exceptional contact technology and powerful solver for large scale multibody models with multiple contacts and flexible bodies.
EZtol is a 1-Dimensional tolerance stackup analysis program designed to assist in understanding the impact of the accumulation of part-level dimensional variation and sources and the impact that they have on assembly-level requirements.
GD&T Advisor the interactive software solution to guide the designer or engineer towards the correct application of GD&T, based on CETOL 6σ Precise Constraint Technology
Three software solutions: Start Prof, the first Pipe Stress Analysis Software; HYDROSYSTEM, Nominal Size Selection, Heat Loss & Hydraulic Calculation of Pipeline Systems and PASSAT, Stress and Stability Analysis of Vessels and Apparatuses Software.
Total Materia is the world’s most comprehensive materials database providing lightning fast access to properties for over 450.000 metals, polymers, ceramics and composites.
modeFRONTIER provides a seamless coupling with third party engineering tools, enables the automation of the design simulation process, and facilitates analytic decision making.
The “smart Prod ACTIVE” tool predicts the quality, energy and cost of the injection process in real-time, covering the 100% of products, and suggests the appropriate re-actions to adjust the process set-up and/or mechanism.
One of the most challenging tasks for an analyst is to develop load cases for their FEA model that match measured strain values.
VOLTA is a web-based enterprise solution for companies who feel the need organize their simulation process with a platform that can foster collaboration.
CASE STUDY
Modern propeller requirements involve many different characteristics, not limiting only to maximum efficiency, but considering also propeller cavitating behavior and, more and more, its side effects, in terms of radiated noise and pressure pulses.
marine modefrontier optimization
CASE STUDY
This technical article describes a human body model (HBM) wizard developed for RecurDyn and discusses what is already possible and what is in the development pipeline for the near future. Biomotion Solutions provides software to quickly build HBMs in industrial-grade simulation packages.
multibody recurdyn industry4 biomechanics
CASE STUDY
This project investigates how best to correctly predict the energy absorption of these non-isotropic and non-homogeneous materials, whose lamina thickness is typically of the order of 0.2 mm or less and consists of tiny fibers or particles dispersed in a matrix material.
ls-dyna aerospace composites
