Electronics expertise

Our expertise in Electronics

CASE STUDY

New solution for cost-effective electromagnetic analysis

EnginSoft’s contribution recognized in the F4E Technology Transfer Program

EnginSoft’s cost-effective solution was successfully created in collaboration with F4E’s expert teams after numerous years spent developing and testing tools, algorithms and customized interfaces in each phase of the Electromagnetic FEM analysis workflow.

energy ansys electronics

CASE STUDY

Ensuring product innovation and lifetime product performance right from the design phase

Lovato Electrics chooses ANSYS MAXWELL to guarantee it brings superior products to market in less time

Lovato Electric is committed to delivering innovation through its products and so it commissioned EnginSoft to help it create a pilot project in order to compare and finally select an electromagnetic field simulation software solution.

ansys electronics

CASE STUDY

Ku-band filter design for high power space applications using Ansys simulators

This paper presents the design and first experimental results of a very compact Ku-band bandpass filter for high power satellite applications. The filter was designed and simulated using the Ansys HFSS and Mechanical simulators. Proposed as part of an ESA ARTES Advanced Technology project, the filter is based on dielectric loaded combline resonators.

ansys electronics aerospace

CASE STUDY

Optimizing the performance of antennas installed on avionics platforms

Rapid and accurate evaluation of platform impact on antenna radiating characteristics is vital

This article discusses the use of the Ansys HFSS SBR+ method for wave propagation analysis that is based on specific EM propagation formulations (commonly referred to as Asymptotic Methods), and which offers an effective alternative in terms of solution accuracy and computational cost. The method’s effectiveness is demonstrated in this case study that considers the analysis of an ESM sinuous antenna installed on an avionics platform.

ansys electronics

CASE STUDY

New process to analyze vibrational fatigue of solder joints on printed circuit boards used in electric vehicles

High degree of automation allows assessment of massive number of solder joints and electronic components

This technical article presents a simulation process to analyze fatigue in electronic parts, particularly in solder joints, on printed circuit boards (PCBs).

femfat electronics automotive

CASE STUDY

The Fundamental Role of a Simulation-Based Approach in New High-Technology Product Development

Numerical simulation assists in all phases of product development from scoping and costing to final performance analysis

Simulation is nowadays strongly connected to new product development in most high-technology industries.

ansys electronics

CASE STUDY

Using simulation and validation to build trust in new tools

A multibody simulation of a switch disconnector

This article describes the multibody simulation of a switch disconnector and its validation with experimental tests, undertaken by LOVATO Electric for the purpose of conducting a detailed evaluation of a potential new tool to design the mechanical part of its electrical devices.

recurdyn multibody electronics

CASE STUDY

New Ferry boat: Emax 2 circuit breaker tolerance analysis for maximum efficiency in panelbuilding

EnginSoft engineers help ABB optimize the Emax 2 design to allow ABB’s client IMESA to create a highly compact switchgear column for a state-of-the-art ferryboat

In this technical case study, we illustrate how EnginSoft engineers helped ABB to optimize the design of the Emax2 project.

tolerances cetol electronics mechanics eztol

CASE STUDY

Comparing cooling methods for e-motors

A simulation methodology developed by TotalEnergies

In this paper, we will present the methodology developed by TotalEnergies and EnginSoft to select, design and improve an e-motor by simulating and predicting electromagnetic losses, fluid flow behaviour and temperature distributions.

automotive electronics particleworks

CASE STUDY

Optimizing the cable routing for a hyper-redundant inspection robot for harsh, hazardous environments

A multi-objective optimization framework to reduce the actuation loads and increase the payload

This article discusses a multi-objective optimization study to determine the optimal matrix for the routing of the actuating cable system in order to minimize the cable load on the robot and maximize the robot’s payload.

optimization modefrontier mechanics electronics

CASE STUDY

Using Simulation and Modeling for medical Radio Frequency design

A study demonstrating the benefits of simulation over prototyping

The growth of technology and end-user expectations is ever more important in many application areas and medical devices are at the forefront of this innovation process.

ansys electronics

CASE STUDY

Ultra-Wide Band Radome CAE Optimization

Overcoming mechanical and electromagnetic challenges in refining a radome for electronic warfare

Elettronica SpA designs and produces systems for electronic warfare. Each system design is unique according to its platform and purpose. In this article, the company describes how it used CAE to approach the challenging design of a single sandwich radome.

ansys optimization electronics