CASE STUDY
The residual strength, in particular the compression strength after damage due to low velocity impact, is one of the most critical issue for composite laminates.
ls-dyna aerospace modefrontier composites
CASE STUDY
The present work investigates the Warm Hydro Forming (WHF) process of an AA6xxx series alloy (AA6061-T6) using a numerical-experimental approach.
ls-dyna metal-process-simulation
CASE STUDY
The connecting rod is one of the most important components in powertrain systems, so it requires very careful structural analyses because its failure implies serious damage to the entire engine.
automotive ansys rail-transport
CASE STUDY
Oil or gas pipelines that cover long distances pose complex design challenges. Every environment the pipeline crosses is characterized by different potential geohazards. One of the most dangerous for a pipeline is a rockfall.
oil-gas mechanics ansys
CASE STUDY
The object of this study was simulating and optimizing the cold forging process for a silent block bush steel sleeve. A silent block bush is traditionally used in the linkage system of a car suspension, in railway carriages and in agricultural machinery.
metal-process-simulation forge forging automotive
CASE STUDY
The object of this study is a steel diffuser, which for obvious reasons needs to comply with very strict quality guidelines and industry regulations.
metal process simulation die casting metal-process-simulation magma consumer-goods
CASE STUDY
Connecting rods connect the pistons to the crank shaft in automotive engines and are vital components of the engine. Connecting rods are traditionally produced in ferrous metals by forging or die casting.
metal-process-simulation automotive magma
CASE STUDY
A virtual prototype of a belt must necessarily include the high flexibility of the belt itself, as well as a detailed description of the contacts. This is another scenario where RecurDyn provides better functionality than its competitors.
multibody mbd-ansys recurdyn
CASE STUDY
Engineers will normally need to evaluate a number of different designs, only one of which will result in the final construction configuration. This is why numerical simulation plays an indispensible role in roller coaster design.
ansys civil-engineering construction
CASE STUDY
Dynamic studies are required to predict the accelerations, verify that the cams are properly shaped, and to extract the loads to structurally size the parts.
recurdyn multibody mbd-ansys automotive
CASE STUDY
This is a classic scenario that exploits the best features of RecurDyn software, such as the Full-Flex and the Geo-Contact technology.
recurdyn multibody mbd-ansys