Engineering Day | Webinar

Gear whining solution in a van mechanical transmission

Gear whining optimization

Date: 10 November 2021

Timetable: 15.30 - 16.00 CET

Speaker/s: Daniele Sacchi

Language: English

In the past the design of the gears in a mechanical transmission was mainly pointing to the strength, both bending and pitting.

Now the requests for the comfort of the powertrain are obliging the designer to increase the refinements about overall gearbox design and the micro-geometries of the teeth.

This webinar will show a very deep approach to solve claimed whining noise in a van gearbox.

Topics

  • Gears;

  • Tooth microgeometry;

  • LTCA;

  • Tooth Contact Analysis;

  • Side bands.

Enrolment Methods

The event is free: you need to register to attend.

A Web platform (GoToWebinar) is used, which does not require local software installation.
You can participate in the session via: MAC, PC, or any mobile device.

Upon registration, a link, and credentials to participate will be sent to the e-mail address provided.

You can ask questions and participate in the discussion in the chat room.

Afterwards you will be able to watch the recording of this webinar, and our other initiatives, by visiting the Media Center on our website or our YouTube channel.

Engineering Day

2021, 10th November | Hour: 15:30 CET

Enjoy the initiative!

 

Find out more

software

Masta

Suite for the design, analysis, verification and optimization of any driveline and mechanical power reducers/multipliers

MASTA is a suite for the complete design, analysis and optimisation of mechanical transmissions, encompassing numerous advancing forms of analysis from static deflection to component fatigue and NVH.

masta mechanics cfd drivetrain automotive aerospace energy acoustic multibody

NEWSROOM

Stay connected with us: news, analysis and trends from our experts.

Newsroom  

MEDIA CENTER

Scroll through our Media Center to view all the videos, video-tutorials and recorded webinars.

Media Center  

CASE STUDY

High Pressure Die Casting Optimization of a Connecting Rod

A multi-objective engineering simulation study of the connecting rods manufacturing process

Connecting rods connect the pistons to the crank shaft in automotive engines and are vital components of the engine. Connecting rods are traditionally produced in ferrous metals by forging or die casting.

metal-process-simulation automotive magma