Course category
Standard
Level
Advanced
Duration
4 hours [1 day: 4 hours in the morning]
Time
9:00 - 13:00
Language
English
Tutors
Sara Metus, Tiziano Minotto
Description
The course aims to enable users to integrate and simulate mechanical models developed in RecurDyn with control systems that have been developed in RecurDyn/Colink or in MATLAB Simulink. The RecurDyn/Colink module is a simplified clone of MATLAB Simulink and is fully integrated into RecurDyn. The integration between mechanics and control (typical of the mechatronics context) allows the correct operation of the entire system to be verified, and any problems related to the control system to be solved. Since the calculations are solved in the time domain, the control systems are tested in a highly non-linear context, similar to the actual scenario.
Target Audience
Engineers, RecurDyn users who need to simulate devices that integrate control systems.
Pre-requisites
Knowledge of applied mechanics and control systems.
Rigid Multi-body simulation using RecurDyn Professional.
Agenda
Session 1 (4h) - Day 1/1
Introduction to RecurDyn/Colink
Definition of the interface nodes (gates)
Modalities of co-simulation with MATLAB Simulink
Managing simulations and the relative solvers
To receive more information on our training proposals, or a personalized offer, click on the "Send an information request" button and fill out the form with your details and we will contact you.
Send an information requestYou will receive a personalized offer for each course, based on your preferred delivery method (live online, in person in one of our classrooms or in-house at your company), and requirements (number of participants, curriculum, level and technology).
Dates, times and provision methods (live online, in person in our facilities or in-house at your premises) will be agreed with the customer: the information provided in the course overviews is merely indicative.
For live online courses, we use a web platform that does not require installation of local software. It enables participation in the sessions via Mac, PC or any mobile device. The EnginSoft Training Secretariat will send the participation link and credentials to the individual trainees.
Silvia Galtarossa
Ph. +39 049 770 5311 | corsi@enginsoft.it