Tech Day - Online

Particleworks Tech Day

Mesh-less CFD Moving Particle Simulation

Date: 13 October 2021

Timetable: 9.00 - 16.00 (GMT+1)

Speakers: Michele Merelli / Gianluca Parma

Language: English

Mesh-less CFD Moving Particle Simulation

Particleworks is a fluid dynamics analysis software based on the numerical "Moving Particle Semi-implicit method" (MPS).

This method makes it possible to solve free surface flows and jets without using a mesh, but by discretizing the fluid using particles. The main advantage of this method is the remarkable simplicity and speed of building a complex model compared to classical CFD methods, based on a calculation grid.

The time saving, allow you to go from simulation times in the order of one month to one day.

The MPS method is particularly effective for the simulation of liquid flows with high deformation of the free surface and for studying the interaction between fluids and moving parts, such as in transmission systems, motors, bearings and hydraulic turbines.

Particleworks also solves heat transfer between the fluid and the walls of the system and is used both for the study of piston cooling (combustion engines) and for the cooling of modern electric motors.

AGENDA:

9.00 – 10.30 | Part 1
Introduction to Particleworks and the MPS methodology. Simulation process, data setting and software structure

10.30 – 10.45 | Pause

10.45 – 12.15 | Part 2
Definition of a model, from the import of the geometry to the launch of the simulation (each participant will build a model following the trainer's advice)

12.15 – 14.00 | Pause

14.00 – 16.00 | Part 3
Post-processing: visualization and quantitative analysis

After the training, participants will receive a 4-week trial license of the Particleworks.

During the trial period, EnginSoft will assign an engineer to each participant to follow up on specific projects / models and provide online support by scheduling regular web meetings.

Registration Procedure

This event is free of charge: registration is required to attend.

It uses a web platform (Zoom) that does not require local software installation. You can join the session via: Mac, PC, or any mobile device.

Registered participants will receive the link and credentials to participate at the email address provided during registration.

You can ask questions and participate in the discussion via the chat function in the web platform.

SUBSCRIBE NOW

13 October 2021 | 9.00 - 16.00

For more information:

Massimo Galbiati
Phone +39 035 368 711
m.galbiati@enginsoft.com

Find out more:

software

Particleworks

An advanced CFD Software solution, based on the Moving Particle Simulation (MPS) method

Particleworks is an advanced CFD Software solution, based on the Moving Particle Simulation (MPS) method.

particleworks

Read More  

NEWSROOM
Stay connected with our news, analysis and trends from our experts

 

Read More  

MEDIA CENTER
Scroll through our Media Center to view all the videos, video-tutorials and recorded webinars

Media Center  

CASE STUDY

Beyond the barrier of perfection

Optimization Case study of a multi-stage steam turbine designed by Franco Tosi Meccanica

This case study details the design optimization of an axial steam turbine of 160 MW, focusing on maximizing the total-to-total isentropic efficiency of the last three low-pressure stages of the turbine.

cfd ansys turbomachinery modefrontier

Read More