software
The strategicGIANT (Growth Impact AssessmeNT) Solution developed by EnginSoft UK to help water companies meet the challenges of urban development under the new regulatory requirements imposed by OFWAT.
software
The fully integrated 3D tolerance analysis software tool provides the invaluable insight needed to confidently release designs for manufacture and inform the selection of appropriate tolerances to achieve your variation goals efficiently.
software
Particleworks is an advanced CFD Software solution, based on the Moving Particle Simulation (MPS) method.
The fully integrated 3D tolerance analysis software tool provides the invaluable insight needed to confidently release designs for manufacture and inform the selection of appropriate tolerances to achieve your variation goals efficiently.
EZtol is a 1-Dimensional tolerance stackup analysis program designed to assist in understanding the impact of the accumulation of part-level dimensional variation and sources and the impact that they have on assembly-level requirements.
GD&T Advisor the interactive software solution to guide the designer or engineer towards the correct application of GD&T, based on CETOL 6σ Precise Constraint Technology
Maple is an advanced numeric and symbolic solution with a powerful maths engine
MapleSim is the advanced system-level modeling solution based on the Maple mathematical engine and analysis environment to design and simulate multidomain systems, plants and controls in one single environment.
modeFRONTIER provides a seamless coupling with third party engineering tools, enables the automation of the design simulation process, and facilitates analytic decision making.
Particleworks is an advanced CFD Software solution, based on the Moving Particle Simulation (MPS) method.
RecurDyn is a superior Multibody Dynamics solution with exceptional contact technology and powerful solver for large scale multibody models with multiple contacts and flexible bodies.
Flownex Simulation Environment delivers technology that enables you to study how systems will behave in the real world, where fluid is the driving factor.
The strategicGIANT (Growth Impact AssessmeNT) Solution developed by EnginSoft UK to help water companies meet the challenges of urban development under the new regulatory requirements imposed by OFWAT.
Three software solutions: Start Prof, the first Pipe Stress Analysis Software; HYDROSYSTEM, Nominal Size Selection, Heat Loss & Hydraulic Calculation of Pipeline Systems and PASSAT, Stress and Stability Analysis of Vessels and Apparatuses Software.
ROCKY is a 3D Discrete Element Modeling (DEM) code that simulates the granular flow behavior of different shaped and sized particles.
Total Materia is the world’s most comprehensive materials database providing lightning fast access to properties for over 450.000 metals, polymers, ceramics and composites.
GENESIS is a Software Package for Structural Analysis and Design Optimization, focused on Topology one.
GSAM is an integrated extension that adds topology, topography, freeform, sizing and topometry optimization to the Ansys environment. GTAM is an integrated extension that adds topology optimization to the Ansys environment.
VOLTA is a web-based enterprise solution for companies who feel the need organize their simulation process with a platform that can foster collaboration.
One of the most challenging tasks for an analyst is to develop load cases for their FEA model that match measured strain values.
The “smart Prod ACTIVE” tool predicts the quality, energy and cost of the injection process in real-time, covering the 100% of products, and suggests the appropriate re-actions to adjust the process set-up and/or mechanism.
Using this technique, all material constants can be evaluated without expensive experimental campaigns.
SIMUL8 is a software for modeling, simulating, analyzing and optimizing the system-level performance of production systems during their design, reconfiguration and production planning phases.
CASE STUDY
This technical article describes a comparative study that was undertaken by Intermarine, with the assistance of EnginSoft, between using the Flownex simulation environment and Intermarine’s manual or classic methods (both of which were compared with actual field data from on-board measurements) to predict pressure losses in the various piping systems that convey fluids on board a vessel.
marine energy oil-gas flownex
CASE STUDY
This paper presents the design and first experimental results of a very compact Ku-band bandpass filter for high power satellite applications. The filter was designed and simulated using the Ansys HFSS and Mechanical simulators. Proposed as part of an ESA ARTES Advanced Technology project, the filter is based on dielectric loaded combline resonators.
ansys electronics aerospace
CASE STUDY
Special Springs commissioned EnginSoft’s engineers to calculate the production cost repercussions of a technical product modification requested by an important customer.
mechanics cetol tollerances eztol
